Abstract
An efficient process was developed allowing the removal of metal ions from polycontaminated aqueous solutions by combining modified colloids and membranes. Firstly, filtration experiments were performed using polyethersulfone membranes modified by a self-assembled multilayer film of polyelectrolytes. These polymer-modified membranes allowed the uptake of more than 90% of the metal ions initially present in the contaminated solutions (for solutions concentrated at 50 mg L −1). Secondly, adsorption experiments were carried out with colloidal silica encapsulated with carboxymethyl chitosan (SiO 2-CMCS) or with mesoporous silica functionalized by grafting of 1,4,8,11-tetraazacyclotetradecane, i.e., cyclam (SiO 2-cyclam). The adsorption capacity of these compounds was shown to be higher than numerous other literature-known adsorbents, reaching 68 and 61 mg g −1 towards Cu(II) for SiO 2-CMCS and SiO 2-cyclam, respectively. Finally, by coupling adsorption with ultrafiltration in the tangential mode, the removal of Cu(II), Ni(II) and Zn(II) ions was found to be improved, allowing to reach a removal efficiency of 99% towards Cu(II), Ni(II) and Zn(II) ions at a metal concentration of 50 mg L −1 , and a promising removal efficiency around 70% at a very high metal concentration of 1200 mg L −1. The mechanisms involved in the capture of the metal ions by modified membranes and colloids are also discussed.