Abstract
Ferroelectric symmetric superlattices consisting of alternating layers of PbTiO3 and PbZr0.2Ti0.8O3, were grown by pulsed laser deposition on SrTiO3 and SrRuO3-coated SrTiO3 substrates. The superlattices, with wavelengths K ranging from 20A ° to 200A ° , were analyzed using x-ray diffraction (h 2h diffraction scans, rocking curves, and reciprocal space mapping), high resolution transmission electron microscopy, and piezoforce scanning microscopy. For large-period superlattices, the strain is relieved by the formation of an a/c polydomain structure which propagates through the whole film. We investigate the influence of the wavelength on the a-domain volume fraction, the lattice parameters, the in-plane strain exx, and the mosaicity of the samples. We show that with decreasing the wavelength, a reduction of the a-domain volume fraction is observed as well as a reduced tensile in-plane strain and a lower mosaicity. A concomitant improvement of the local ferroelectric response is detected. Below a critical wavelength of about 30A ° and a critical sample thickness of 500A ° , the formation of 90 a/c domains is inhibited and the superlattices are completely c oriented. Thus the reduced wavelength induces compressive strain which dominates over the tensile clamping due to the thermal expansion mismatch between the substrate and the superlattice. This compressive strain favors a c-oriented structure in the PbTiO3/PbZr0.2Ti0.8O3 superlattices.