Résumé
To compare the proximal fixation characteristics of different types of stent-grafts (SG) and the adjunctive effect of a proximally placed Palmaz stent.
Human cadaveric aortas were obtained at autopsy and cut into 30 aortic segments. Appropriately oversized (10% to 20%) commercial stent-grafts (Zenith, Ancure, Excluder, Talent) and 4 configurations of homemade Palmaz-based stent-grafts (polytetrafluoroethylene or polyester coverings each with no uncovered proximal edge or a 20-mm bare section of stent) were implanted 20 mm into an aortic segment and balloon dilated. Each segment was placed in an experimental apparatus to measure the dislodgment force. Bare Palmaz stents were used to reinforce the proximal fixation of the commercial stent-grafts, and the measurements were repeated. Manual anastomoses were made and their dislodgment force tested for comparison.
The median dislodgment force ranged from 6.5 N for the Excluder to 26.5 N for the Zenith (8.0 N for the Talent, 11.8 N for the Ancure, and 8.1 to 10.7 N for the various Palmaz stent-graft designs). There was no significant difference between the Zenith and the Ancure groups or between the Excluder and the Talent groups. However, the Zenith and Ancure devices required significantly higher (p=0.0004) force (approximately 25%) to displace them than the other stent-grafts tested. With the Palmaz stent added to the proximal attachment site, the median dislodgment force for the different commercial endografts was significantly improved for all devices (p<0.03): 34% for the Zenith device, 69% for the Ancure, 73% for the Talent, and 80% for the Excluder endoprosthesis.
The Zenith stent-graft had the best resistance to dislodgment. An additional Palmaz stent placed at the proximal attachment site greatly improves endograft fixation regardless of the type of stent-graft. For complex aneurysm necks or for intraoperative type I endoleak management, an adjunctive Palmaz stent could be used.