Abstract
ZnOGa"2O"3 alloys have been deposited by electron beam co-evaporation technique below the piezoelectric radio frequency magnetron sputtered ZnO films, with the aim of reducing the compressive stress due to the piezoelectric zinc oxide elaborated by radio frequency magnetron technique. The structural characterizations of the Ga"2O"3 thin films show an amorphous structure. Co-evaporating gallium oxide with zinc oxide has improved the optical and structural qualities of the e-beam zinc oxide films. Thus, deposing compressive rf magnetron sputtered piezoelectric ZnO on tensile thin layers of ZnOGa"2O"3, has reduced the stress and improved the structural quality of the realized bulk acoustic wave resonators. The fabrication of less stressed ZnO resonators has permitted to liberate partially our membranes by attacking the silicon substrate on which the resonator is realized. Finally, hyper frequency characterizations have been done by a network analyzer to study the influence of the silicon substrate thickness on the piezoelectric activity.