Abstract
SBA-15-supported copper-chromium mixed oxide nanoparticles (CuCr/SBA-15) were prepared by incipient wetness impregnation followed by mild drying at 25 1C and calcination. The Cu : Cr weight ratios were 1 : 1, 5 : 1, and 10 : 1, at a constant total loading of 5 wt%. Monocomponent SBA-15-supported Cu-oxide (Cu/SBA-15) and Cr-oxide (Cr/SBA-15) were prepared as reference samples. The materials were systematically characterized by XRD at low and high angles, N2 physisorption, DR UV-vis, FT-IR, and XPS spectroscopies, and TPR. XRD at low angles and N2 physisorption confirmed the preservation of the mesoporous structure of the SBA-15 support after impregnation and calcination. In the case of monocomponent samples, CuO appeared poorly dispersed, while the Cr species (Cr2O3, mono- and polychromates) appeared highly dispersed on the surface of the SBA-15 support. The progressive addition of chromium to copper had positive effects on the average crystallite size of CuO, which decreased from B28 nm (Cu/SBA-15) to B3 nm (CuCr/SBA-15; Cu : Cr = 1 : 1), and on reducibility, as well. Metallic active phases were obtained by reducing of the oxide phases under a hydrogen flow at 350 1C. By comparison to the monometallic catalysts, the reduced CuCr/SBA-15 materials were active in the hydrogenation of cinnamaldehyde and chemoselective towards cinnammyl alcohol (450 mol%). The activity can be correlated with the particle size of copper, whereas the high selectivity to unsaturated alcohol can be associated with the presence of dual Cu0-Crn+ sites.