Abstract
Ceramic porous scaffolds functionalized with Metal Organic Frameworks (MOFs) are promising systems for carbon capture, providing a valuable strategy to decrease CO2 atmospheric concentration and mitigating the dramatic issues related to global warming. Thus, the present work focuses on the combination of a highly microporous CO2 adsorbent HKUST-1 coating with porous and interconnected mullite (3Al2O3⋅2SiO2) substrates obtained by a combination of additive manufacturing and impregnation techniques, before a complete characterization of their CO2 sorption properties. Two triply periodic minimal surface (TPMS) architectures, Schwartz Primitive and gyroid, were fabricated with high resolution and accuracy by Digital Light Processing, using two mullite powders, labelled Mc and Mf, presenting different compositions and granulometry. Mullite monoliths were functionalized with a continuous HKUST-1 (Cu3(BTC)2) coating. The impact of the type of architecture on the amount of deposited HKUST-1 and the sorption capacity were monitored. MOFs mass intakes reached 4.2 and 3.9 wt% for Mc Schwartz primitive and gyroid respectively. The textural properties and CO2 sorption capacity of the materials were studied by N2 and CO2 sorption at 77 K and 298 K respectively. CO2 gas chromatography was performed at different temperatures (32 °C - 80 °C) and gas flows (10 - 40 mL/min) using a filled column with the different materials. TPMS monoliths were compared to traditional adsorbent powder bed in terms of pressure drops, permeability, gas speed and retention time normalized by MOFs amount, highlighting the advantages of the shaping approaches with respect to powder beds. High permeabilities were reached (Darcy's coefficient k≈10 x 10-13 m2 for Mc Schwartz). Monoliths also promoted CO2/adsorbent contact time, lowering the gas speed under 1.5 cm/s, compared to 2 to 5 cm/s, in the case of powder bed. HKUST-1 functionalized TPMS monoliths drastically enhanced the CO2 retention time normalized by MOFs amount, with values increased by a factor 6, from 7 s/g for the powder bed to 30 s/g and 20 s/g for gyroid and Schwartz primitive scaffolds respectively. This work represents a crucial step forward in the development of hierarchically porous and geometrically complex carbon capture and storage systems. Indeed, the current work goes beyond our previous studies by producing and comparing different TPMS designs and introducing for the first time gas chromatography to demonstrate the advantages of TPMS scaffolds in enhancing CO2 adsorption efficiency