Résumé
Green hydrogen as an energy carrier has the potential to dramatically reduce our greenhouse gas emissions and meet the net-zero emissions targets set by the Paris Agreement countries by 2050. This hydrogen can be produced by electrolysis using water and renewable electricity, and be converted into electricity on demand in a fuel cell. Proton exchange membrane fuel cells (PEMFC) are already commercialized, but due to their acidic environment, these devices require precious metal catalysts, in particular platinum, which is an obstacle to their large-scale deployment. In contrast, anion exchange membrane fuel cells (AEMFCs) operate at high pH, facilitating the use of cost-effective and sustainable precious metal free catalysts.To catalyze the hydrogen oxidation reaction (HOR) in alkaline media, nickel has shown interesting performances to replace precious metal catalysts at the anode of AEMFCs [1]. In order to improve the intrinsic activity of nickel-based materials and reach the performance of precious metals catalysts, two approaches are studied in the literature: optimization of intrinsic properties by alloying Ni with other earth abundant elements, or core@shell nanostructuration of Ni by a protective carbon shell. We are focused on this second approach through the mechanochemical synthesis of a nickel-based Metal-Organic Framework (MOF) from a Ni2+ salt and BTC (1,3,5-benzenetricarboxylic acid), followed by pyrolysis under different atmospheres (Figure 1.a). As already shown in the literature [2], there is a significant effect of the pyrolysis atmospheres (NH3, H2, N2, in various ratios) on the electrochemical performance of the catalysts (Figure 1.b). In this study, we employed ex situ and operando studies approaches to investigate the influence of these different atmospheres on the nanoparticles structuration and to relate them to the electrochemical performances obtained.Our Ni-based anode materials were characterized by X-ray diffraction, electron microscopy, nitrogen adsorption, and electrochemical techniques, including AEMFC tests. Furthermore, the transformation of the MOF into an active catalyst was followed with in-situ X-ray absorption spectroscopy.[1] Zhao, J. Chen, W. Sun, H. Pan, «Non-Platinum Group Metal Electrocatalysts toward Efficient Hydrogen Oxidation Reaction», Adv. Funct. Mater., vol. 31, no 20, 2021, p. 2010633.[2] Ni et al., « An efficient nickel hydrogen oxidation catalyst for hydroxide exchange membrane fuel cells », Nat. Mater., vol. 21, no 7, 2022, p. 804.