Abstract
In this communication, we will present a dual-purpose calibration system of NectarCAM, a medium-size-telescope camera proposed for the Cherenkov Telescope Array (CTA). The device is based on a white diffuse-reflective screen mounted on an XY motorization to reach every location in the focal plane, including a parking position when not in use. The design of the system was led by the requirements to perform the mirror alignment and the study of the telescope Point Spread Function (PSF) on one side (A), and to calibrate the photodetection chains (one for each of the 1855 photomultiplier tubes) of the camera in single photoelectron mode on the other side (B). The main requirement for the calibration device consists in producing a high-reflective (> 90% between 450 nm and 700 nm) and diffusive (following Lambert's cosine law) surface for side A. The other side, B, should emit an homogeneous amount of light over the surface. To satisfy these requirements, we developed a unique screen made out of PMMA and coated with the BC-620 paint from Saint-Gobain. For single-photoelectron calibration purposes, light is produced by a pulsed light source and injected into the screen via a fishtail light guide. We studied the optimal screen shape, paint, and painting process. To do so, we produced several prototypes and compared the light output intensity over the screen surface. These studies led to the definition of a specific painting pattern that enhances the light emission uniformity over the final octagonal screen surface. After having briefly described the developed prototypes that led to the current calibration device, we will focus on the calibration system performances and will describe the dip-coating application process, which is an essential technique to achieve reliable and reproducible optical performances.